How to Connect a Canon Printer to Wi-Fi (and Fix It When It Won't Connect)
· Editorial policy Last Updated:Last updated: October 29, 2026.
Quick answer: The easiest way to connect a Canon printer to Wi-Fi is the free Canon PRINT app. Put the printer in setup mode (on most screenless PIXMAs, hold the Wi-Fi or Wireless connect button for about 3 seconds) and follow the app. If your router has a WPS button, you can skip the app and press WPS within 2 minutes of starting WPS on the printer. Models with a screen also let you pick your network and type the password under LAN settings > Wireless LAN setup. If it won't connect, the most common reason is that the printer only supports 2.4 GHz and your phone is on a 5 GHz network.
Canon makes three very different families of printer, and the buttons depend on which one you have. Find your printer type below, then skip to the troubleshooting section if setup fails.
Castle Ink
Fix the error, then stop overpaying: Canon ink from $3.95
Remanufactured Canon ink cartridges for up to 70% less than Canon charges. Same-day shipping when you order by 4 PM ET, 1-year 100% satisfaction guarantee.
Compare genuine vs remanufactured Canon ink prices →
Shop all Canon ink →✓ Ships same day by 4 PM ET✓ Free US shipping over $50✓ 1-year guarantee
Before You Start
- Have your Wi-Fi network name (SSID) and password ready. The password is case-sensitive.
- Put the printer within a room or two of the router for setup. You can move it afterwards.
- If your router uses one network name for both 2.4 GHz and 5 GHz, that's usually fine. If it has separate names, connect your phone or computer to the 2.4 GHz one during setup. Canon's own troubleshooting asks you to confirm the router is using 2.4 GHz.
- Install Canon PRINT (iOS 16+ or Android 7+). Canon has merged Canon PRINT Business into it, so it now covers PIXMA, MAXIFY, SELPHY and imageCLASS.
Method 1: Canon PRINT App (Screenless PIXMA and Most Models)
This is Canon's recommended method and the only practical one on budget PIXMAs with no screen (TS3x20, TS3x22, TS5x20, MG3620, TR4720 and similar).
- Turn the printer on.
- Press and hold the Wi-Fi button (on some models it's labeled Wireless connect) for about 3 seconds, until the Wi-Fi lamp starts flashing. The printer is now waiting for the app.
- Open Canon PRINT, tap to add a printer, and follow the prompts. The app finds the printer, sends it your Wi-Fi details and adds it.
- When the Wi-Fi lamp stays lit (not flashing), the printer is connected.
On a computer, the setup software from Canon's website does the same job. On Windows, Canon's IJ Network Device Setup Utility can also find a printer on the network and change its settings.
Method 2: WPS Push Button
WPS connects the printer without typing a password, as long as your router has a WPS button.
Screenless PIXMA (MG3620 shown; other models are similar):
- Hold the printer's Wi-Fi button until the ON lamp blinks.
- Press Black, then Wi-Fi. The Wi-Fi lamp blinks rapidly.
- Within 2 minutes, press the WPS button on your router.
- When the Wi-Fi and ON lamps both stay lit, you're connected. If the Alarm lamp lights instead, see troubleshooting below.
imageCLASS laser printers: go to Menu > Network Settings > Wireless LAN Settings > WPS Push Button Mode > Yes, then press and hold the router's WPS button within 2 minutes. The Wi-Fi light blinks, then stays on, and the printer gets its IP address within about 2 minutes. If you see "Cannot find Access Point", start again from WPS Push Button Mode.
Not sure where your router's WPS button is, or what a WPS PIN is? See WPS PIN on a printer.
Method 3: Choose Your Network on the Screen (LCD and Touchscreen Models)
On PIXMAs with a screen (TS6420, TS8x20, TR8620, MX922 and similar) and on MAXIFY printers:
- Go to Home > LAN settings > Wireless LAN setup.
- Choose Manual connect (some models call it Other setup or Select from list).
- Select your network from the list.
- Enter your Wi-Fi password and tap OK, then OK again to confirm.
- When you see the completion screen, tap OK. A network icon appears at the bottom of the home screen.
These models also offer Cableless setup under Wireless LAN setup, which hands setup over to the Canon PRINT app. Your phone connects to the printer directly for a moment, so it may switch to mobile data during setup.
imageCLASS laser printers: if the printer was wired before, first go to Menu > Network Settings > Select Wired/Wireless LAN > Wireless LAN and restart it. Then go to Wireless LAN Settings > SSID Settings > Select Access Point, pick your network (if it's listed twice, choose the top entry, which has the strongest signal), enter the key and select Apply. An imageCLASS can't use wired and wireless at the same time, so unplug the network cable.
Connecting After a New Router or a Changed Password
A Canon printer won't find a new network on its own. If you have a screen, just repeat Method 3 with the new details. If it still holds on to the old network, or you have a screenless model, reset the network settings and set it up again:
| Printer | How to reset network settings |
|---|---|
| PIXMA MG3600 series (MG3620) | Hold Stop until the Alarm lamp flashes 19 times, then release |
| PIXMA E560 series | Hold Stop until the Alarm lamp flashes 17 times, then release |
| Screenless TS3x22-class | Hold Stop for 21 flashes (resets all settings, not just network) |
| Models with a screen | Setup > Device settings > Reset setting > LAN settings (exact wording varies) |
The flash count differs from model to model, so check your printer's online manual before you hold the button. Counting wrong can reset the wrong thing. Our Canon reset guide covers the other reset types.
Canon Printer Won't Connect to Wi-Fi? Check These
- It's a 2.4 GHz-only printer. Most budget PIXMAs don't support 5 GHz, and Canon notes that some routers give each band its own network name, often with "-5G" at the end. Connect to the 2.4 GHz network. Some higher-end models (the TS9100 series, for example) do support 5 GHz.
- The router is filtering devices. Canon lists MAC address filtering, IP address filtering and turned-off DHCP as common blockers. If you use MAC filtering, add the printer's MAC address (it's on the network settings printout).
- The WPS timer ran out. You have 2 minutes between starting WPS on the printer and pressing the router button.
- Interference (support code 6910). Canon's fix is to move the printer or turn off other wireless devices for a while.
- The printer joined but your computer can't see it. Print the network settings page (the Information button on TS3300-series printers, or LAN settings > Print LAN details on screen models) and check the printer's network name matches your computer's. Then see printer won't connect to my computer.
- The Alarm lamp is flashing. On screenless PIXMAs the number of flashes is an error code. Look it up in your manual or our Canon error code list.
For other brands, see our general Wi-Fi setup guide.
What Canon owners ask
These are the questions that come up most for Canon printers on support communities and retailer Q&A pages, answered in our words.
Why can't my Canon printer see my Wi-Fi network?
It's most likely a 2.4 GHz-only model trying to join a 5 GHz network. Connect to your router's 2.4 GHz network name, or turn on 2.4 GHz if it's disabled.
I got a new router. How do I reset my MG3620?
Hold Stop until the Alarm lamp flashes 19 times, release it, then run setup again with the Canon PRINT app or WPS.
Should I use Canon PRINT or Canon PRINT Business for my imageCLASS?
Canon PRINT. Canon has merged Canon PRINT Business into it, and the Business app now points users there.
Can I print without a router?
Yes. Most Canon printers have Wireless Direct (a Direct button or a menu setting), which lets your phone connect straight to the printer. See why won't my printer connect to my phone.
Canon Wi-Fi FAQs
How do I connect my Canon printer to Wi-Fi without a screen?
Hold the Wi-Fi (or Wireless connect) button for about 3 seconds until the lamp flashes, then finish setup in the Canon PRINT app. Or use WPS: start WPS on the printer and press the router's WPS button within 2 minutes.
Do Canon printers work on 5 GHz Wi-Fi?
Most budget PIXMA models are 2.4 GHz only. Some higher-end models, such as the TS9100 series, support both 2.4 and 5 GHz. Check your model's specifications.
How do I reconnect my Canon printer after changing my Wi-Fi password?
On models with a screen, run Wireless LAN setup again and enter the new password. On screenless models, reset the network settings with the Stop button (the flash count depends on the model), then set it up again with the Canon PRINT app or WPS.
Shop Canon Ink at Castle Ink
Once you're printing again, our remanufactured Canon cartridges cost a fraction of genuine and carry a one-year guarantee.
Sources
Checked October 29, 2026. Steps are taken from Canon's online manuals; button names and flash counts vary by model.
- Canon: MG3600 series WPS setup
- Canon: Wireless Connect setup
- Canon: TR8500 series manual connect
- Canon: MAXIFY cableless setup
- Canon: imageCLASS wireless LAN setup
- Canon: MG3600 series network reset
- Canon: printer not found during network setup
- Canon: TS9100 series network specifications
- Canon USA: Canon PRINT app
Castle Ink
Save up to 70% on Canon ink
Remanufactured cartridges with a 1-year guarantee. Order by 4 PM ET and it ships the same day. Free US shipping over $50.