What Ink Does the Canon PIXMA TS702 Use?

Last updated: September 25, 2026.

Quick answer: The Canon PIXMA TS702 (and TS702a) uses five ink tanks: PGI-280 pigment black plus CLI-281 black, cyan, magenta and yellow, in standard, XL or XXL sizes. Castle Ink’s remanufactured PGI-280XXL/CLI-281XXL 5-pack is $59.95, and single XXL tanks are $6.99–$8.99.

What Ink Cartridges Does the Canon PIXMA TS702 Use?

Yields are the manufacturer's ISO estimates at about 5% coverage; photos and heavy graphics use more ink. Castle Ink prices checked September 2026.

Which Printers Use the Same Ink as the TS702?

PGI-280/CLI-281 tanks also fit the PIXMA TR7520, TR8520, TR8620, TS6120, TS6220, TS6320, TS8120, TS8220, TS8320, TS9120 and TS9520. Six-ink models (TS8120/8220/8320, TS9120) add a CLI-281 photo blue tank that the TS702 doesn’t use. Look up any model in our find ink by printer directory.

What Is the Cheapest Ink for the TS702?

Remanufactured XXL tanks are the cheapest way to run the TS702. Canon’s original XXL tanks typically cost around $20–$30 each, so a full set can top $100. Castle Ink’s remanufactured XXL 5-pack is $59.95, and single XXL tanks are $6.99–$8.99, so you can replace just the color that runs out. See cheapest PGI-280/CLI-281 ink for a full price comparison.

Should I Buy Standard, XL or XXL Tanks for the TS702?

XXL. It holds the most ink and costs the least per page; the PGI-280XXL black prints about 600 pages versus about 250 for the standard tank. All three sizes fit the same slots.

How Do I Replace the Ink in the Canon PIXMA TS702?

1. Turn the printer on and open the scanner unit/cover; the print head holder moves to the replacement position.
2. Press the tab on the empty ink tank and lift it out.
3. Remove the new tank from its packaging, then twist or pull off the orange protective cap (and any film).
4. Insert the tank into its matching color slot and press the PUSH mark until it clicks. The tank's lamp should light red.
5. Close the cover. If prompted about a non-genuine or refilled cartridge, confirm to continue.

Will Remanufactured Ink Work in the TS702?

Yes. Canon PIXMA printers are generally friendly to third-party cartridges. You may see a message that a non-genuine or refilled cartridge is installed, or that the ink level can't be detected; confirm to continue printing, and keep a spare of the colors you use most since levels may not display. Using third-party ink does not void your warranty (here's why).

Why Does My TS702 Say the Cartridge Isn't Recognized?

Remove the cartridge, make sure all protective tape and caps are off, wipe the chip or copper contacts gently with a dry lint-free cloth, and reinstall until it clicks. Confirm the part number matches this printer, then restart. If the message started right after a firmware update, the update may be blocking third-party chips. Full steps: ink cartridge not recognized.

How Do I Fix Streaky or Faded Prints on the TS702?

From the printer's Setup/Maintenance menu (or the Canon IJ utility on your computer), print a nozzle check, then run one Cleaning cycle and check again; use Deep Cleaning only if needed. See how to clean Canon printer heads.

What Are the Canon PIXMA TS702's Key Features?

The PIXMA TS702 is a single-function wireless printer (print only) aimed at home offices, with automatic two-sided printing, a front paper cassette plus rear tray, Wi-Fi and Ethernet, and AirPrint and Canon PRINT app support. It’s sold as the TS702a in some channels; both use the same ink.

Is the TS702 Still Worth Using in 2026?

Yes. The TS702 is a solid, inexpensive print-only machine, and PGI-280/CLI-281 tanks are widely available at low prices. Compare current models in our printer buying guide, or take the ~60-second PrinterIQ Finder quiz.

For drivers and the manual, visit the Canon PIXMA TS702 support page.

Canon PIXMA TS702 Ink FAQs

What ink does the Canon PIXMA TS702 use?

Canon PGI-280 pigment black plus CLI-281 black, cyan, magenta and yellow tanks, in standard, XL or XXL sizes.

Does the TS702a use the same ink as the TS702?

Yes. Both use PGI-280/CLI-281.

Does the TS702 use photo blue ink?

No. Photo blue is only for six-ink PIXMA models.

Can the TS702 scan or copy?

No. It’s a print-only printer.

Are remanufactured cartridges safe for the TS702?

Yes, from a reputable seller. See are compatible ink cartridges safe?

Related guides: TR8620 | how to replace Canon ink

Need help choosing? Contact us with your printer model. Orders placed by 4 PM ET Monday–Friday ship the same day, with free shipping over $50.

About the Author: William Elward is the founder of Castle Ink and has been writing about printers, ink cartridges and printing technology for over 20 years.

More PGI-280/CLI-281 printers: five-ink models include the PIXMA TR8520 and PIXMA TS6320; the PIXMA TS8120 is a six-ink model that adds photo blue.