What Toner Does the Brother DCP-7030 Use?
Last Updated:The Brother DCP-7030 is a monochrome laser printer that uses the TN-360 toner cartridge and the DR-360 drum unit. The toner produces the printed image while the drum transfers it to paper — they are two separate consumables on this model.
Brother TN360 Toner & Drum at a Glance
| Consumable | Part Number | Page Yield | Type |
|---|---|---|---|
| Black Toner | TN-360 | ~2,600 pages | Standard |
| Drum Unit | DR-360 | ~12,000 pages | Replace every ~3 toners |
The TN-360 is also compatible with other Brother models including the HL-2140, HL-2150N, HL-2170W, DCP-7040, MFC-7340, MFC-7440N, and MFC-7840W, making it a high-volume cartridge family that is widely stocked in genuine, remanufactured, and compatible versions.
Save on TN360 Toner & DR-360 Drum
You can save money by choosing remanufactured or compatible cartridges instead of OEM. Browse our selection of TN360 toner cartridges and DR-360 drum units to find the best price for your Brother DCP-7030.
How to Replace the Toner and Drum
- Power on the Brother DCP-7030 and open the toner access cover.
- Pull out the toner/drum assembly as a single unit.
- To replace just the toner, push the green lock lever and separate the toner from the drum, then snap in the new TN360 cartridge.
- To replace the drum, install the existing toner into the new DR-360 drum unit.
- Slide the assembly back into the printer, close the cover, and reset the drum counter if you replaced the drum.
Troubleshooting Tips
"Replace Toner" or low-toner warning: Many Brother printers track toner usage by page counter. After installing a new cartridge, you may need to reset the toner counter from the front panel menu.
Faded or streaky prints: Gently rock the toner cartridge side-to-side to redistribute toner, then reinstall. If streaks remain, clean the corona wire by sliding the green tab back and forth several times.
Drum error: After installing a new DR-360, hold the appropriate reset button sequence (Clear/Back + OK on most models) to reset the drum counter to zero.
Paper jams or smudges: Inspect the paper path and pickup roller for wear. Replacing worn rollers and keeping the printer dust-free prevents repeated print-quality issues.
Official Brother Resources
Bottom Line
The Brother DCP-7030 uses the TN-360 toner and DR-360 drum unit. Stock up on compatible replacements to keep your printer running for less. Shop TN360 toner here.
Frequently Asked Questions
Q: What toner does the Brother DCP-7030 use?
A: The Brother DCP-7030 uses the TN-360 black toner cartridge.
Q: Does the Brother DCP-7030 need a separate drum unit?
A: Yes — the DR-360 drum unit is separate from the toner and typically lasts about 12,000 pages, or roughly three toner cartridges.
Q: Can I use compatible TN360 cartridges?
A: Yes. Quality remanufactured and compatible TN360 cartridges work reliably in the Brother DCP-7030 and cost much less than OEM.
Q: How do I reset the toner counter?
A: With the front cover open, press the menu/clear sequence specific to your model (consult the user manual). The printer will recognize the new cartridge after reset.
Q: Where can I buy TN360 toner?
A: Browse TN360 cartridges at Castle Ink for genuine, remanufactured, and compatible options.
— William Elward, Castle Ink