What Toner Does the HP LaserJet Pro MFP M428fdw Use?
Last Updated:The HP LaserJet Pro MFP M428fdw is a monochrome laser all-in-one that uses the HP 58A (CF258A) toner cartridge, along with a separate HP 32A (CF232A) imaging drum unit.
HP 58A Toner & Drum at a Glance
| Consumable | Part Number | Page Yield | Type |
|---|---|---|---|
| Black Toner | HP 58A (CF258A) | ~3,000 pages | Standard |
| Black Toner | HP 58X (CF258X) | ~10,000 pages | High Yield |
| Imaging Drum | HP 32A (CF232A) | ~23,000 pages | Separate Drum Unit |
The higher-yield HP 58X cartridge fits the same printer and is a much better value for busy offices. The HP 32A imaging drum is shared with several other HP LaserJet Pro M15–M31 and M404–M527 family models and typically lasts through many toner cartridge changes before it needs replacing.
Save on HP 58A Toner
You can save money by choosing remanufactured or compatible cartridges instead of OEM. Browse our selection of HP 58A toner cartridges to find the best price for your LaserJet Pro MFP M428fdw.
How to Replace the Toner
- Power on the HP LaserJet Pro MFP M428fdw and open the front cover.
- Pull the used HP 58A cartridge straight out of the printer.
- Unbox the new cartridge, rock it gently 5–6 times to distribute toner, and remove the protective seal.
- Slide the new HP 58A cartridge in until it clicks into place.
- Close the cover. The printer will recognize the new cartridge automatically.
Troubleshooting Tips
"Replace Toner" or low-toner warning: HP cartridges report level via chip. If a known-good cartridge shows low or non-genuine warning, try power-cycling the printer or updating firmware.
Faded or streaky prints: Gently rock the toner cartridge side-to-side to redistribute toner, then reinstall. If streaks persist after a fresh toner cartridge, the HP 32A imaging drum may need replacing.
Duplex printing or faxing issues: Update the printer firmware and drivers, and confirm the duplexer is fully seated if pages are printing blank on one side.
Paper jams or smudges: Inspect the paper path and pickup roller for wear. Replacing worn rollers and keeping the printer dust-free prevents repeated print-quality issues.
Official HP Resources
Bottom Line
The HP LaserJet Pro MFP M428fdw uses the HP 58A (or HP 58X) toner cartridge and a separate HP 32A imaging drum. Stock up on compatible replacements to keep your printer running for less. Shop HP 58A toner here.
Frequently Asked Questions
Q: What toner does the HP LaserJet Pro MFP M428fdw use?
A: The HP LaserJet Pro MFP M428fdw uses the HP 58A (CF258A) or high-yield HP 58X (CF258X) black toner cartridge.
Q: Does the HP LaserJet Pro MFP M428fdw have a separate drum unit?
A: Yes — the HP 32A (CF232A) imaging drum is a separate consumable from the toner cartridge and is replaced far less often.
Q: Can I use compatible HP 58A cartridges?
A: Yes. Quality remanufactured and compatible HP 58A cartridges work reliably in the M428fdw and cost much less than OEM.
Q: How do I reset the toner counter?
A: HP printers detect new cartridges automatically via chip — no manual reset is needed.
Q: Where can I buy HP 58A toner?
A: Browse HP 58A toner cartridges at Castle Ink for genuine, remanufactured, and compatible options.
— William Elward, Castle Ink
Shop Compatible Toner at Castle Ink
Save 50–70% on replacement toner for the HP LaserJet Pro MFP M428fdw. Guaranteed to work — backed by Castle Ink's compatibility guarantee.
Buy the HP LaserJet Pro MFP M428fdw on Amazon: Buy the HP LaserJet Pro MFP M428fdw on Amazon
See also: What Toner Does the HP LaserJet Pro MFP M29w Use? | What Toner Does the Xerox VersaLink C405 Use?