What Ink Does the HP OfficeJet 4650 Use?
Last Updated:Quick answer: The HP OfficeJet 4650 uses HP 63 Black and HP 63 Tri-color ink cartridges. For roughly 3x more pages and a better cost-per-page, choose the HP 63XL high-yield versions instead — same physical cartridge, just more ink inside.
HP OfficeJet 4650 Ink Cartridges at a Glance
| Cartridge | Part Number | Approx. Page Yield |
|---|---|---|
| HP 63 Black (standard) | F6U62AN | ~190 pages |
| HP 63 Tri-color (standard) | F6U61AN | ~165 pages |
| HP 63XL Black (high-yield) | F6U64AN | ~480 pages |
| HP 63XL Tri-color (high-yield) | F6U63AN | ~330 pages |
Save on HP 63 / 63XL Ink for the OfficeJet 4650
The XL versions cut your cost-per-page by more than half. Our compatible HP 63XL set includes both Black and Tri-color cartridges and ships free in the U.S. on orders over $50.
Shop the HP 63 / 63XL Black + Tri-color Set →
How to Replace Ink in the HP OfficeJet 4650
- Power the printer on and open the cartridge access door — the front panel above the output tray. Wait for the carriage to slide to the center of the printer.
- Press down lightly on the old cartridge to release it from its slot, then pull it straight up and out.
- Unbox the new HP 63 or 63XL cartridge. Remove the orange plastic protective tab — avoid touching the copper contacts or the ink nozzles.
- Slide the new cartridge into its slot at a slight upward angle (Black on the right, Tri-color on the left) and push gently until you hear it click.
- Close the cartridge access door. The OfficeJet 4650 will print an alignment page on plain paper — once it finishes, you're ready to print.
Troubleshooting Tips
Cartridge not recognized after install: Power-cycle the printer by unplugging it for 30 seconds. The OfficeJet 4650 often needs a hard reset before it re-handshakes with a freshly installed cartridge.
Faded prints or missing colors: Run the cleaning cycle from the printer's Tools menu, or from HP Smart. Two cycles will usually clear minor clogs.
"Print head failure" or cartridge error: Remove both cartridges, gently wipe the copper contacts with a lint-free cloth, and reseat them. Most false errors come from oxidation on the contacts.
Low-ink warning right after install: HP's ink-level estimator is based on usage telemetry, not a physical gauge. It can take 5–10 print jobs to recalibrate after a fresh cartridge. Ignore the warning unless print quality drops.
Official HP Resources
Bottom Line
The HP OfficeJet 4650 takes HP 63 or HP 63XL cartridges — the XL high-yield is the smarter buy for the cost-per-page savings. Compatible cartridges from Castle Ink work identically and ship free in the U.S. on $50+ orders.
Get your HP 63 / 63XL ink for the OfficeJet 4650 →
Frequently Asked Questions
Can I use HP 63XL cartridges in an OfficeJet 4650 that shipped with HP 63 standard?
Yes. The OfficeJet 4650 accepts both HP 63 standard and HP 63XL high-yield cartridges interchangeably. The XL versions are the same physical size — they just hold more ink and yield more pages.
Will compatible HP 63XL cartridges void my OfficeJet 4650 warranty?
No. Under the Magnuson-Moss Warranty Act in the United States, using third-party ink does not void your printer warranty. HP can only deny warranty coverage if the third-party cartridge directly caused a specific failure.
How many pages does an HP 63XL print in the OfficeJet 4650?
HP rates the 63XL black at approximately 480 pages and the 63XL tri-color at approximately 330 pages, based on the ISO/IEC 24711 standard at 5% page coverage. Actual yield varies with print density and color usage.
Which other HP printers use HP 63 ink?
HP 63 / 63XL cartridges work in the HP OfficeJet 3830, 4650, 4652, 4655, 5220, 5230, 5232, 5252, 5255, and 5258 — as well as several HP Envy 4500 series printers (4510, 4520, 4525, etc.) and DeskJet 1112, 2130, 2132, 3630, 3631, 3632, 3633, and 3634 models.
Why does my OfficeJet 4650 keep saying low ink right after I install a new cartridge?
HP's ink-level estimator is based on usage telemetry, not a physical ink gauge. After installing a new cartridge, the estimator can take a few print jobs to recalibrate. Ignore the warning unless print quality actually degrades.