What Ink Does the Epson WorkForce Pro WF-4834 Use?

Correction (October 2026): an earlier version of this guide said standard Epson 822 black gives about 240 pages and linked to the WF-4833's support page. Epson rates standard 822 at about 350 pages for black and 240 for each color, and the WF-4834's support page is listed under model C11CJ05203.

CastleScore · October 2026

81/100 — Highly Recommended

Epson WorkForce Pro WF-4834

Pillar (weight)ScoreWhat it is based on
Owner ratings (28%) 84 4.30★ average across 192 ratings at Amazon (4.3)
Expert reviews (18%) 80 PCMag (WF-4830) 4.0/5
Cost per page (24%) 71 About 6.1¢ per page blended (black + color) with our remanufactured 822XL (1,100 pages each). Docked because the printer can reject cartridges without the maker's chip.
Reliability (13%) 87 Most-reported problems: paper feed / multiple-sheet feeding
Features (12%) 92 Print, copy, scan, document feeder, auto two-sided printing, fax, Wi-Fi, Ethernet, touchscreen, fast (20+ ppm).
Value (5%) 83 Running cost and owner satisfaction against a street price of about $99

Hard to find new. Epson.com lists the WF-4834 at $99.99 but out of stock, and Epson also sells it as a Certified ReNew refurbished unit. Epson 822 and 822XL cartridges are still sold.

CastleScore is Castle Ink’s own editorial rating, built from retailer star ratings, expert reviews, real cost per page and owner complaint patterns, checked October 8, 2026. It is not a customer review. See every ranked printer or how the score works.

The cartridges, pictured

Our own remanufactured cartridges, photographed in-house.

Quick answer: what ink does the Epson WorkForce Pro WF-4834 use?

The Epson WorkForce Pro WF-4834 uses 4 Epson 822 DURABrite Ultra cartridges: black, cyan, magenta, and yellow. High-capacity 822XL cartridges fit the same slots. Epson rates standard 822 at about 350 pages for black and 240 for each color, and 822XL at about 1,100 pages for black and each color. The pigment ink dries fast and resists smudging, which suits office documents.

Epson WorkForce Pro WF-4834 ink cartridge chart: Epson 822 and 822XL cartridges in black, cyan, magenta, and yellow, with part numbers and printers that share the same ink
Epson 822 cartridges for the WF-4834, and the printers that share them.

Cartridge options at a glance

Cartridge Part numbers Approx. yield*
Epson 822 black T822120 ~350 pages
Epson 822 color (C/M/Y) T822220 / T822320 / T822420 ~240 pages each
Epson 822XL black T822XL120 ~1,100 pages
Epson 822XL color (C/M/Y) T822XL220 / T822XL320 / T822XL420 ~1,100 pages each

*Epson ISO yields. Real-world results depend on coverage, photo printing, and cleaning cycles.

Common questions about Epson WorkForce Pro WF-4834 ink

Should I buy Epson 822 or 822XL for the WF-4834?

822XL for most people. By Epson's ratings it gives about three times the black pages (1,100 vs. 350) and more than four times the pages per color (1,100 vs. 240). See Is XL ink actually worth it? Standard vs. XL with real numbers.

Can I mix standard and XL cartridges?

Yes. Each cartridge is read separately, so any mix of 822 and 822XL works.

What other printers use Epson 822 ink?

Epson 822/822XL also fits the WorkForce Pro WF-3820, WF-3823, WF-4820, WF-4830, and WF-4833. If you own more than one, a single stock of cartridges covers them all.

Will other Epson cartridges fit the WF-4834?

No. Epson 802 (WF-4720/4730/4740) and Epson 902 (WF-C5xxx) look similar but aren't interchangeable. Always match the number on your current cartridge.

Are compatible 822XL cartridges safe for the WF-4834?

There is a real risk. Epson says the WF-4834 is designed for use only with Epson cartridges, and its FAQ says a firmware update can stop non-Epson cartridges from being recognized. Its remedy is genuine ink. If you run non-Epson cartridges, don't install firmware updates. Using third-party ink doesn't void your warranty under U.S. law. More: Compatible vs. remanufactured vs. OEM ink and Does compatible ink void your printer warranty?.

How do I replace the ink in the WF-4834?

With the printer on, start the replacement from the control panel (or when the printer prompts you) and open the ink cartridge cover it shows. Remove the empty cartridge, shake the new one gently, unpack it, and push it into the matching slot until it locks. Close the cover and let the printer charge the ink. Step-by-step: How to install an ink cartridge in an Epson printer.

Why won't the WF-4834 recognize a cartridge?

Reseat it firmly until it clicks, make sure the yellow tape is fully removed, and wipe the chip with a dry lint-free cloth. Turn the printer off for a minute. If a compatible cartridge stops working right after a firmware update, contact the seller for a replacement. More fixes: Printer says ink cartridge not recognized: how to fix it.

Why are prints from my WF-4834 faded, streaky, or blurry?

Run a nozzle check from the Maintenance menu first. Gaps mean a clog: run a head cleaning (up to two or three cycles). If the check is complete but lines look jagged or doubled, align the print head instead; see our print head alignment guide. More fixes: Why is my printer printing streaks?.

Why did the first set of cartridges run out so fast?

New Epson printers use part of the first set to charge the ink system. It's a one-time cost. See why the first cartridges run out fast.

Does the WF-4834 print double-sided and fax?

Yes. The WF-4834 is a business all-in-one that prints, scans, copies, and faxes, with automatic 2-sided printing and an automatic document feeder. It's closely related to the WF-4830 and uses the same 822 ink.

How much does the WF-4834 cost to run?

With XL cartridges, the ink cost per page is far lower than with standard cartridges. Compare the numbers for your usage with the Printer ink cost calculator.

What WF-4834 owners ask

These are the questions that come up most for this printer on retailer Q&A pages, Epson's support pages and owner reviews, answered in our words.

Can I print black text while a color cartridge is empty?

For a short while, on plain paper or envelopes only. On Windows, choose Black/Grayscale and click Print in Black in the Status Monitor. On a Mac, turn on Permit temporary black printing. Then replace the color cartridge.

Will the document feeder take legal-size originals and scan both sides?

Yes. The ADF holds 50 letter or 10 legal sheets, and Epson lists automatic two-sided scanning for letter size.

How much paper does it hold?

Two 250-sheet trays, so 500 sheets of plain paper, or up to 50 photo sheets or 10 envelopes, at sizes up to legal.

The installer stalls on Windows 11. Is that known?

Yes. Epson's WF-4834 support page lists it as a known issue (article wa00981), where the installer stops responding during setup.

Can I still buy a WF-4834?

Possibly, but stock is thin. Epson.com lists it at $99.99 but out of stock, and Epson also lists a Certified ReNew refurbished version (C11CJ05203-N).

WF-4834 quirks worth knowing

  • Epson's model number for the WF-4834 is C11CJ05203. C11CJ05202 is the WF-4833, so support pages and downloads are easy to mix up.
  • Two-sided is fully automatic for printing, copying, scanning and faxing, but the rated speed drops from 25 black / 12 color ISO pages a minute to 16 / 9 when printing both sides.
  • Besides Wi-Fi, Wi-Fi Direct and Ethernet, it uses Bluetooth Low Energy to help with setup.
  • An owner who lost compatible cartridges to a firmware update was told on an expert Q&A site that Epson firmware can't be rolled back. Decide about updates before you install one, not after.

Other printers that use Epson 822

Epson WorkForce Pro WF-4820 · Epson WorkForce Pro WF-4830 · Epson WorkForce WF-3820

More Epson ink guides: Epson WorkForce WF-2950 · Epson Expression Premium XP-7100 · Epson WorkForce WF-2930 · find any printer

Replacing it? Our highest-rated alternatives

Sources

Ratings and prices were checked on October 8, 2026 and will change over time.

Need replacement Epson ink cartridges? Shop Epson ink cartridges at Castle Ink. Remanufactured, up to 70% less than OEM, and shipped the same day when you order by 4 PM ET.

Written and reviewed by — Founder of Castle Ink, 20+ years in the printer & imaging supplies industry.