Free U.S. shipping on ink and toner orders over $50

What Ink Does the HP Envy 7640 Use?

Quick answer: The HP Envy 7640 uses HP 62 Black and HP 62 Tri-color ink cartridges. For better value, pick the HP 62XL high-yield versions.

HP Envy 7640 Ink Cartridges at a Glance

  • HP 62 Black — ~200 pages
  • HP 62 Tri-color — ~165 pages
  • HP 62XL Black — ~600 pages
  • HP 62XL Tri-color — ~415 pages

The Envy 7640 e-All-in-One uses two cartridges — one black and one tri-color. Both standard and XL versions fit the printer, and you can mix and match (for example, a 62XL black with a standard 62 tri-color).

Save on HP 62 Ink with Compatible Cartridges

The HP 62 family is among HP's pricier legacy cartridges. Castle Ink's compatible HP 62XL set matches OEM print quality for up to 75% less than the retail price. Every cartridge ships same-day from the U.S. and is backed by our satisfaction guarantee.

How to Replace Ink in the HP Envy 7640

  1. Power the printer on and open the cartridge access door.
  2. Wait for the carriage to move to the center and stop.
  3. Press down on the old cartridge to release it, then pull it straight out.
  4. Unwrap the new cartridge and peel away the protective tape (avoid the copper contacts).
  5. Slide the cartridge into the matching color slot and push up until it clicks.
  6. Close the door and let the printer run an alignment page.

Troubleshooting Tips

  • Cartridge error after install: Reseat the cartridge and gently wipe the copper contacts with a lint-free cloth.
  • Streaky or missing colors: Run the cleaning utility from the HP Smart app or the printer's front-panel menu.
  • Low-ink warning on a new cartridge: This is cosmetic and will clear after the chip catches up — print quality is unaffected.

Official HP Envy 7640 Resources

For drivers, firmware, and the user manual, visit the HP Envy 7640 support page.

Bottom Line

The HP Envy 7640 takes HP 62 or HP 62XL cartridges. Choose the XL versions for a much lower cost-per-page, and check Castle Ink's compatible HP 62XL set to save significantly over OEM retail pricing.

About William Elward

Founder of Castle Ink, William Elward has 20 years experience in the printer industry. He's been featured on CNN Money, Yahoo, PC World, Computer World, and other top publications and frequently blogs about printers and ink cartridges. He's an expert at diagnosing printer issues and has published guides to fixing common printer issues across the internet. A graduate of Bryant University and Columbia's Sulzberger Executive Leadership Program, he's held various leadership positions at The College Board, Bankrate, Zocdoc, and Everyday Health. Follow him on Twitter at William Elward's Twitter Profile